15
OPERATING NOTES
Keep Warm Mode
When the program is completed, the bread maker will beep 10 times, the display will show
0:00, and then the bread maker will automatically go into Keep Warm mode for 1 hour.
When Keep Warm mode is over, the display will show . You can manually end Keep
Warm mode by pressing and holding the START button for 3 seconds.
Power Interruption
If power is lost during operation, but is restored within 10 minutes, the bread maker will
automatically resume the program without needing to press the START button. If the
interruption is longer than 15 minutes, the program cannot be automatically resumed. If the
bread has begun to rise, the contents of the bread pan should be discarded. Otherwise,
you can press the START button to restart the program.
Fault Display
If the display shows H:HH, the temperature inside the bread pan is too high. Press the
START button to stop the program, then let the bread pan cool for 10~20 minutes before
restarting the program.
If the display shows E:E0, the temperature sensor has failed. If the bread maker is within its
warranty period, contact Customer Service to obtain a replacement.
To Next Page
Loading...