1
ABOUT THE UPRINT SE/UPRINT SE PLUS
The uPrint SE/uPrint SE Plus printers incorporate the latest in innovative technologies to provide you with
precise prototypes from a CAD design. The uPrint SE/uPrint SE Plus printers build models from CAD STL
files that are sent to the system using a USB cable from a dedicated host computer. The printers build three-
dimensional parts by extruding a bead of ABS material through a computer-controlled extrusion head, producing
high quality parts that are ready to use immediately after completion.
COMPONENTS
• The uPrint SE printer or uPrint SE Plus printer (depending on model purchased)
• CatalystEX Software Package
HIGHLIGHTS
UPRINT SE HIGHLIGHTS
• Maximum build area of 8 x 6 x 6 inch (203 x 152 x 152 mm)
• User Interface with Display Panel and Keypad
UPRINT SE PLUS HIGHLIGHTS
• Maximum build area of 8 x 8 x 6 inch (203 x 203 x 152 mm)
• User Interface with Display Panel and Keypad
HOW TO USE THIS GUIDE
This guide provides information for selecting an appropriate location for the uPrint SE/uPrint SE Plus printer.
Information of particular importance is presented in one of three formats:
Warning: A WARNING indicates a procedure that may cause injury to an operator if
the procedure is not followed. A WARNING will precede the paragraph of instruction
to which it relates.
Caution: A CAUTION indicates a procedure that may cause damage to equipment
if the procedure is not followed. A CAUTION will precede the paragraph of
instruction to which it relates.
Note: A NOTE is used to highlight a specific point or to provide an operational tip.
While useful, a NOTE does not indicate a procedure that can cause injury or
damage if it is not followed. A NOTE will follow the paragraph of instruction to which
it relates.
To Next Page
Loading...
