Index
Index-3
SABS connector
164-1:1992, B-9
safety notices, 1-10
service requirements, AC-power, 2-2
SEV connector
1011-S24507, B-10
single-phase circuit connections
120 V AC, B-4
240 V AC, B-5
site planning
checklist, 1-2
overview, 1-1
space planning, 3-1
cables, 3-3
future expansion, 3-2
room requirements, 3-1
specifications
AC power, 2-2
cabinet, A-4
CPU-I/O enclosure, A-5
PDUs, A-9
rack-mountable system, A-1
split-phase circuit connections
120–240 V AC, B-6
standards compliance, C-1
star ground, B-2
Stratus Customer Assistance Center. See CAC
switches
circuit breaker
PDU, A-8
Ethernet
cable planning, 3-3, 4-6
Fibre Channel, 1-5
cable planning, 4-3
site network, 3-3
system power cords, 2-13
system specifications
rack-mounted systems, A-1
T
tape-drive enclosures
power cords, 2-13
SCSI cables, 4-2
technical support. See CAC
telephone lines, 4-8
for ASN modem assembly, 1-3, 4-8
for support calls, 4-8
telephones
for support calls, 1-4
three-phase circuit connections
208 V AC, B-7
380 V AC, B-8
U
U104 PCIe Ethernet adapters, 4-5, 4-6
U105 PCIe Ethernet adapters, 4-5, 4-6
U106 PCIe SAS adapters, 4-2
U108 PCIe Ethernet adapters, 4-5, 4-6
uninterruptible power supply (UPS). See UPS
UPS, 2-12
network communication hardware, 2-10
network communication software, 2-10
network management card, 2-10
PDU connections, 2-10
rack system connections, 2-12
V
Virtual Technician Modules. See VTMs
VTMs
cables, 4-6
in an ftGateway group, 4-10
site planning, 1-3
W
wiring, electrical, B-1
To Next Page
