EasyManua.ls Logo

Stricker CITY 7 - 9 Functioning of the Steering Alignment Elastomer; 10 City 7 Plus Additional Mountain Gear Ratio (Mountain Drive)

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manual English V16/04 page 17
9 Functioning of the steering alignment elastomer
On the top end of the fork you will find a device to
dampen the steering movements.
Multiple elastomers always take the fork back to a
straight position.
picture.15
The lower tube which holts the Rubbers is designed for adjust the direction of the fork
by turning right and left.
10 City 7 Plus additional mountain gear ratio (Mountain Drive)
If your Hand-Bike has an additional mountain gear ratio, the 7 gears of the internal hub
gears can be changed through pushing the 2 buttons left and right on the crank.
Left button pushed in: --- > normal 1:1 gear ratio
Right button pushed in: --- > mountain gear ratio 2, 5:1
You can find additional information about Mountain Drive in the appendix.
Attention: If the mountain gear ratio is enabled, it takes a longer
way until the backpedal brake is working. Therefore change back to the 1:1
modus before going downhill.
If you have to brake with enabled mountain gear ratio, be aware, that you
have to move the cranks further, or use the additional handbrake.
Lenkungsdämpfer
Steering
alignment
elastomer