To Next PageTo Next PageHow to fix a Strong SRT 32HC2003 LED TV remote that is not working?
If the remote control for your Strong LED TV isn't working, first replace the batteries. If that doesn't solve the problem, check that the batteries are installed correctly and are of the same type. Also, make sure nothing is blocking the IR sensor on the TV, and that bright light isn't interfering with it.
Why is the picture freezing on my Strong LED TV?
If the picture and sound on your Strong LED TV freeze, or you see macro blocks or similar distortion, it could be due to a weak reception signal or interference from electromagnetic, high-frequency, or other signals, especially with DVB-S/S2 or DVB-T/T2. With DVB-T/T2, disturbances may be caused by signal reflections. For DVB-C or DVB-S/S2, the connection cables at the signal source might be too long. Also, the antenna might not be properly adjusted or has become misaligned.
What causes reception problems with Strong LED TV?
For any other reception or signal-related issues with your Strong LED TV, start by checking all cable connections to ensure they are secure. Moisture in cables or connectors can also cause problems. If there's heavy rain or a storm, especially with DVB-S/S2 and -T/T2, check the cable connections. Inspect all equipment connected between the reception point and the TV. In case of heavy rain/thunderstorm wait until it passes. For further assistance, consult a local satellite specialist, especially if the satellite dish isn't aligned correctly, is too small, or has obstructions in its path. A signal that is too strong might also need to be attenuated.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Built-in Speakers | Yes |
| Power Consumption | 45W |
| Resolution Type | HD |
| Resolution | 1366 x 768 pixels |
| Tuner | DVB-T2/C/S2 |
