PART 1 • English
9
English
5.3.1.3 Country
Press OK/RIGHT to select your country, press OK to confirm. If your country is not in the list, select
Other. It will apply the most common frequency plan for European countries.
5.3.1.4 Channel Numbering
Here you can set the channel list by different number format: Appearing order or Operator defined.
5.3.1.5 Antenna Power
Press OK/RIGHT to select turn OFF or ON the antenna power, press OK to confirm. Before setting
the Antenna Power to ON: make sure your antenna is ACTIVE, requires power 5 V DC and it’s
power consumption is not more then 100 mA.
5.3.1.6 Time Settings
If a broadcaster provides GMT, you can set the time using GMT, or set time by yourself.
If the GMT usage is ON then the Current time is set automatically or you can set the time zone. If
your broadcaster provides the correct time offset then your receiver will change from summertime
to wintertime automatically.
If you set GMT Usage to OFF, Set Data and Set Time item are displayed. To set the time value
manually, move the cursor to the time item and use the numeric buttons on the remote control.
5.3.1.7 Factory Default
Select Factory default and press OK. Select YES and for the warning “Do you want to set factory default?”
press OK, then the receiver will return to its factory default state, and all user data will be deleted.
5.3.2 Personal Style
In this menu, you can set the Menu Colour, Transparency Level, Border Pattern and Entry Animation.
Press UP/DOWN to select the item, and Press LEFT/RIGHT to set the value and OK to confirm.
5.3.3 Parental Control
In this menu, you can set Channel Lock status (ON or OFF), the Menu Lock status, Parental Setting
and change the PIN Code.
The default PIN code is 0000.
5.3.3.1 Channel Lock
Set the system Channel Lock to ON or OFF. If the channel lock is ON, the parental PIN code has to
be entered correctly before watching the locked channel.
5.3.3.2 Menu Lock
Press YES or NO, whether you want to lock the Menu or not and press OK to confirm. If the menu
lock is on, you need to enter your PIN for operations such as search program and set factory default.
To Next Page
