Strong SRT 5016 - Channel Search; Installation

PART 1 • English
8
channel to the new location and press OK to confirm. Repeat this for every channel you want to move.
When the focus is on column “Del”, press OK to mark the channel to be deleted from the list. To apply
changes, press EXIT and confirm channel deletion.
5.1.2 Edit Radio Channels
This menu is similar to 5.1.1 “Edit TV Channels” description.
5.1.3 Sort
You can sort the order of the channel list by Channel Name, LCN (Logical Channel Number) or Channel Number.
5.2 Channel Search
There are 2 items in the Channel Search menu: Automatic Search and Manual Search.
5.2.1 Automatic Search
Press OK over the Automatic Search.
The warning message “Do you want to start Automatic Search?” will appear. Press LEFT/RIGHT to move
the cursor and OK to continue. The message “Do you want to erase your previous channel list?” will appear.
Please press LEFT/RIGHT to choose whether to erase your previous channel list.. If you want to cancel
channel search press the EXIT button.
On completing the search, the receiver will save automatically the services information and exit to
normal play state.
5.2.2 Manual Search
Press OK over the Manual Search, the Manual Search screen will appear.
Press LEFT/RIGHT to choose channel No. or press numerical buttons to input channel number. Check
indicators of the signal level and quality to make sure the values are entered correctly. Press UP/DOWN
to move cursor to Search and press OK to search current channel. If no service is installed, there will be
the warning “No Signal”. Press any key to return.
Tips Different countries have different VHF/UHF frequency plans. It is important to select
the proper country.
5.3 Installation
5.3.1 System Setting
In this menu, you can configure the system settings Language, TV Settings, Country, Channel Numbering,
Antenna Power, Time Settings, and Factory Default.
5.3.1.1 Language
You can change the language of the OSD and Audio.
Press UP/DOWN to select the OSD Language or Audio language.
Press OK/Right to enter the language list and Press UP/DOWN to select the language. Press OK to confirm.