EasyManua.ls Logo

Strong SRT 5016 - Page 18

Strong SRT 5016
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PART 1 • English
15
English
Audio Decoder
MPEG MusiCam Layer I & II
Sampling rate: 32, 44.1, 48 kHz
Audio mode: Stereo, Joint Stereo, Dual Mono, Mono
Tuner
Front End: DVB-T, UHF & VHF Tuner
Input frequency range: 174 ~ 230 MHz (VHF I/III) and 470 ~ 862 MHz (UHF)
Loop through frequency range: 47 ~ 862 MHz
Input signal level: -82 ~ -20 dBm
RF Modulator
Channels: 21 ~ 69 (for TV without Scart)
Output: PAL B/G, I, D/K, M/N
Memory and System
Flash memory: 1 MByte
SDRAM: 64 Mbits
Connectors
ANT input: IEC Female
Loop out: IEC Male
Loop in: IEC Female
TO TV: IEC Male
TV SCART: supports RGB, CVBS, Audio Left/Right Output with Volume Control
VCR SCART: supports CVBS, Audio Left/Right Output with Volume control
3 RCA for Video (Yellow), Audio Left/Right (White/Red)
Coax S/PDIF (Black)
Data Interface- serial port: RS-232, 9-Pin D-Sub Male type
General Data
Supply Voltage: 90 ~ 240 V AC (SMPS), 50/60 Hz
Power Consumption (max): 20 W
Standby Power Consumption: < 10 W
Operating Temperature: 0 °C ~ 40 °C
Storage Temperature: -30 °C ~ 80 °C
Operating Humidity Range: 10 ~ 85 %, RH, Non-condensing
Net-weight: 1.2 kg
Size (W x D x H) in mm: 260 x 210 x 40

Related product manuals