PART 1 • English
8
Transponder field and select transponder by pressing LEFT/RIGHT button). Then choose
field
Move Dish and adjust position of the dish by pressing the LEFT/RIGHT button.
Once you adjust the dish position choose Store position, set number of the position
by pressing LEFT/RIGHT button. Then choose NEXT and press the OK button. The
Channel Setup menu will appear.
3. Dish mounted on GOTO X motor
Set Antenna mode to GOTO X, choose NEXT and press the OK button. The menu Adjust
antenna will appear. Select transponder receivable at your location (choose Transponder field
and select transponder by pressing LEFT/RIGHT buttons). Then choose field My Longitude
and using numeric buttons enter value of your longitude. Use LEFT/RIGHT buttons to
select hemisphere East or West. Then choose field My Latitude and using numeric buttons
enter value of your latitude. Use LEFT/RIGHT buttons to select hemisphere Nord or South.
Choose field Goto Position and press OK. Your dish will be turned to the position of satellite.
Then choose NEXT and press the OK button. The Channel Setup menu will appear.
Choose NEXT and press the OK button to start the scan. When the scan is completed, the
receiver will save the services information automatically and exit to the normal play state.
5.0 MAIN MENU
All the important settings and features of your receiver can be operated in Main Menu. The Main
Menu consists of five sub-menus which are
“Channel Organizer”, “Installation”, “System setting”,
“Timer” and “SD Card”.
Press the MENU key when the menu is off, The MAIN MENU screen will appear.
5.1 Channel Organiser
In the MAIN MENU screen, press UP/DOWN to move the cursor to Channel Organiser, and
then press OK to enter the Channel Organiser menu, which consists of two sub-menus; “Channel
Manager” and “Favourites Manager”.
5.1.1 Channel Manager
In this menu, you can change the order of the channels, move, delete and edit channels. To change
the satellite use the RED button,
n Sort (GREEN buton)
You can sort the channel order in the channel list by “Name a~z”, “Name z~a”, “Free-CA”,
“Fav – NO Fav”
or “Default” type.
n Edit (YELLOW button)
Select the channel that you wish to edit, press the YELLOW (Edit) button to move into the
modify program menu. In this menu, you can modify the Program Name, Down Frequency,
Symbol rate, Video PID, Audio PID.
If you want to rename the channel, use the UP/DOWN keys to select “Program Name” and
press OK, the Program Name dialog will be shown.
Use the LEFT/RIGHT buttons to move the cursor to the character you wish to edit. Use the
UP/DOWN buttons to change character (scroll alphabet). If you wish to delete character you
have to replace it with “space” character. When editing is complete, press the OK button.
To Next Page
Loading...
