15
PART 1 • English
English
When the File Explorer is opened, the name of your connected USB device will be shown on the right
side of the window. Press OK or u to access the USB device. The content of the device will now be
displayed. Only files suitable for playback on your receiver will be displayed. Use pq to select a
file or folder. Press OK to start playback or to open the selected folder. To get back to the previous
folder, use EXIT or t. Alternatively you can also select the folder marked with two points “..” and
press OK.
To format the connected USB device, press the YELLOW button when in the root folder of the
connected device. Please note that the format function will only work on Hard Disk Drives.
Before disconnecting your USB device, please press the GREEN button to “Safely remove USB device”.
WARNING: The Format function will delete all records, data and information from
your USB device. STRONG will not take any responsibility for damaged or
lost data on the USB device. Please make a backup copy of important data
on your USB device before using it with your receiver.
Playback of previously recorded programs
All recorded programs will be placed in the DVR folder on your USB device. Open this folder
as described above and select the desired recording. Press OK to start playback. The following
functions are available during playback: Press 2 to pause the playback. Press 2 again to resume
playback. Use 6 and 5 for fast forward or fast rewind playback. Press EXIT or 3 to get back to the
File Explorer.
Viewing photos
Your receiver allows you to watch a slide show with all photo’s available in the chosen folder. To use the
slide show: choose a folder with photo files. Press YELLOW to open the slide show settings window.
Here you can adjust the Transition mode and Duration. To disable the slideshow mode, set Duration to
Disabled. Once all settings are made, press GREEN to save and exit the Slideshow settings banner.
Select the desired Photo file and press OK to view. Press EXIT to get back to the File Explorer.
Listening to MP3 music
Select the desired MP3 file and press OK to start playback.
During playback, the following functions are available:
: starts playback of the next MP3.
" starts playback of the previous MP3.
3 stops playback.
5shuffle: All files in the directory will be played back in random order.
6 repeat: Press once for single track repeat or twice to repeat all files.
To exit the file explorer: Use EXIT to get back to the Root directory of your USB device.
Press EXIT once more to leave the File Explorer.
Note: Please consider that File Explorer needs a correctly formatted USB device
in order to work with your receiver.
To Next Page
Loading...
