Strong SRT 7100 - Technical Specifications; Demodulator, Video, and Audio Specs; Tuner and System Memory Details

19
PART 1 • English
English
9.0 SPECIFICATIONS
Demodulator
Demodulation: QPSK, 8 PSK
Input Symbol Rate: DVB-S QPSK:1~45 Ms/s
DVB-S2 8PSK/QPSK: 10~30 Ms/s
FEC Decoder: Auto,1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode;
1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode
2/3, 3/5, 3/4, 5/6, 8/9, 9/10 in DVB-S2 8PSK mode.
Video Decoder
Profile Level: MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC
Input Rate: Max. 90 Mbit/s
Aspect Ratio: 4:3, 16:9, Pan & Scan, Letterbox, Combined
Frame Rate: 25 Hz for PAL, 30 Hz for NTSC
Video Resolution: 576p, 720p, 1080i
Audio Decoder
Audio Decoding: MPEG-1 Layer 1&2, MPEG 4 H.264 AAC, AC3 Downmix
Audio Mode: Mono L/R, Stereo, AC 3
Frequency Response: 20 Hz~20 kHz, <+/-2 dB
60 Hz ~ 18 kHz <+/- 0.5 dB
Sampling Rate: 32, 44.1, 48 kHz
Tuner
Connector: 1xF Type , IEC169-24, Female
Input Frequency Rage: 950-2150 MHz
RF Impedance: 75 Ohm unbalanced
Signal Level: -75 to -25 dBm
LNB Power: 13 / 18 V DC (+/-5%)
Max. 0.5 A max, overload protected
DiSEqC Versions: 1.0, 1.1, 1.2, GOTO X, Tone Burst.
System & Memory
CPU: STi7111
Flash Memory: 8 MBytes
System Memory: 256 MBytes