Strong SRT 8115 - 9 Technical Specifications

21
PART 1 • English
English
9.0 TECHNICALSPECIFICATIONS
Demodulator
Demodulator: COFDM; 16 QAM/64 QAM, QPSK
Transmission mode: 2 K - 8 K
VideoDecoder
Profile level: MPEG-2 MP@ML, AVC/H264HP@L4.1, MPEG4 ASP supported
Video resolutions: 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / By Native TV /
By source
Decoding & Video out: PAL
Aspect ratio: 4:3 Letterbox, 4:3 Pan & Scan, 16:9, Auto
AudioDecoder
Audio support: AAC/DD+*/AC3/PCM
MPEG MusiCam Layer 2
Sampling rate: 32, 44.1, 48 KHz
Audio mode: Stereo, Mono
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
Tuner
Front End: DVB-T, UHF & VHF Tuner
Input frequency range: 174 – 230 MHz (VHF) and 470 - 862 MHz (UHF)
Loop through frequency range: 47 - 862 MHz
Input signal level: -20 ~ -84 dBm
Power for active antenna: 5 V, 50 mA max.
Memory andSystem
Flash memory: 4 Mbytes;
SDRAM: 64 Mbytes
Multimedia
Video playback: MPEG-1 and MPEG-2 encoded (mpg), VOB, AVI, MKV, TS, M2T,
M2TS, MPEG-4 and MOV*
Audio playback: MP3 and OGG *
Picture view: BMP and JPEG *
*STRONG cannot guarantee the playback of video files although extensions are listed, as it depends on codec used, data bit rate and resolution (all
MPEG codec formats are supported).
Connectors
ANT IN - IEC Female
TO TV - IEC Male
TV SCART (RGB, CVBS, Audio L&R)
HDMI 1.3
3 RCA (Audio L&R, Video CVBS)
S / PDIF (coax.)