EasyManua.ls Logo

Strong SRT 8208 - Installing the Batteries; Using the Remote Control

Strong SRT 8208
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. ! Mutes audio output of the receiver
5. AUDIO Shows list of Audiotracks, for the current channel.
6. SUB Shows list of subtitled languages, for the current channel.
7. PG+/PG- Page up/down and 10 channels steps in channel list mode
8. EPG Shows the EPG (Electronic Programme Guide) in TV mode
9. TEXT Shows Teletext on OSD (On Screen Display)
10. MENU Opens the main menu. In menu you will get one step back
11. EXIT Exits from the menu or sub-menu. Exits any action initiated.
12. pq Menu O: Change channel to previous/next. Menu On: Moves the highlight
up/down.
13. tu Menu O: Increases/decreases the volume level. Menu On: Change settings
for specic Menus
14. OK Menu O: Displays the current channel list. Menu On: Activates the
highlighted menu item. Conrms actions initiated.
15. GOTO While in playback, select a time to jump to.
16. FAV Favourite group selection
17. TV/R Toggles between TV or RADIO mode
18. RECALL Back to previous shown channel
19. 0~9 Channel selection or value input
20. 4 Records the TV programme to the connected storage device
21. u Start Playback of Timeshift
22. 2/TIMESHIFT Activates the Timeshift function
23. 5 6 Fast rewind/Fast forward
24. 7 8 Previous/Next item in Multimedia.
25. COLOURED BUTTONS
For Editing in menu, Multimedia and Teletext functions. Follow on screen
suggestions. Combined on coloured buttons:
26. ZOOM No function
27. ASPECT Change Subtitle format in movie play.
28. V. F. No function
29. TIMER See an overview and/or edit the timer schedule
2.5 Installing the batteries
Fig.4
Open the cover on the remote control and insert 2x AAA type batteries into the compartment. Observe
correct polarity of the batteries when inserting. A terminal diagram is shown inside the compartment.
1. Remove the cover.
2. Insert the batteries.
3. Place the cover.
2.6 Using the remote control
Fig.5
To use the remote control, point it towards the front of your receiver. The remote control supports a
range of up to 5 meters distance to the receiver at an angle of up to approx. 30 degrees.
NOTE: Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor (at the front panel of the receiver) and
the remote control. Direct sunlight or very bright light can reduce or disturb
the reception of the remote control signals.
6

Related product manuals