EasyManua.ls Logo

Strong SRT 8208 - Connection; Connecting to a Terrestrial Antenna; Connecting to TV with HDMI Cable; Connecting to TV with SCART Cable

Strong SRT 8208
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.0 CONNECTION
3.1 Connecting to a terrestrial antenna
Fig.6
To receive broadcast signal, your terrestrial indoor or outdoor antenna must be connected to the ANT IN
connector on the back of the receiver. Use a properly shielded antenna cable and suitable connectors.
3.2 Connecting to TV with HDMI cable
Fig.6
The TV set shall be connected with the receiver using a good quality HDMI 1.3 or higher cable. This
connection gives the highest possible quality.
3.3 Connecting to TV with SCART cable
Fig.6
The unit is also equipped with a SCART connector; alternatively, the TV set can be connected to the
receiver using a good quality SCART cable.
3.4 Connecting to a Digital Audio Amplier with S/PDIF
Fig.7
By connecting your receiver to a digital amplier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast) up to Dolby Digital. Connect
your Digital Audio Amplier or home theatre system with a suitable cinch cable to the S/PDIF connector
on the back of the receiver.
3.5 Connecting to a Digital Audio Amplier and TV using HDMI
Fig.7
By connecting your receiver to the latest digital ampliers or home theatre systems with HDMI
connections, you will enjoy the best possible sound quality and multi-channel audio (depending
on broadcast), up to Dolby Digital Plus. Connect the HDMI output of the receiver to an input of your
amplier, and then connect the HDMI output of the amplier to your TV set. Select the correct input on
your amplier to watch and listen to programmes.
3.6 Connecting a USB storage device
Fig.8
NOTE: We recommend the use of a hard disk drive USB 2.0 for recording and play
back of TV events.
For proper functioning of Timeshift and recording functions, a fast USB device (such as a hard disk drive)
is needed. Interrupted playback or a distorted picture during playback or Timeshift are indications for a
low device speed. STRONG cannot guarantee proper functioning of recording and or Timeshift functions
with all USB devices.
7
English

Related product manuals