Book Manage See the booked timers list and edit if needed. Use the COLOURED BUTTONS
to Add manually, Delete or Edit a timer entry.
OSD Setting Adapt the On Screen Display (OSD) to your liking.
OSD Timeout Sets the time in seconds for how long the program banner will be shown.
OSD Transparency Sets the level of transparency compared to the running video content.
Channel Switch Mode Options are: Black Screen and Video Freeze. Sets the image when zapping
between channels. Have a black screen or keep the last video frame until the
next channel opens.
Subtitle Display Set to On will have the subtitles (if available) automatically be present on
screen.
USB Upgrade App All This feature allows you to update the receiver software via the USB port.
When a new software is available for your receiver, it can be downloaded
from our website. Place the software le (unzipped) in the root directory of
your USB storage device (HDD, memory stick etc.) and connect the device
to the USB port of the receiver. First a message box will appear that a USB
device is found. Then go to the System menu and select the USB Upgrade
option. At Upgrade Mode select App All and then select the correct le in the
list. Select Start and press OK to start update. When ready, the unit will reboot
automatically.
NOTE: Never interrupt a software upgrade. Do not unplug the USB device. Do not
pull the power cord or switch the receiver o.
User DB Load a Database previously made by the User in USB Backup menu. A backup
of all settings and channels can be re-loaded here, if the channels or settings
inadvertently got messed up. Also to update a DB made on another receiver
of same brand/type, so a setting or channel edit only needs to be performed
once.
NOTE: Never interrupt a software upgrade. Do not unplug the USB device. Do not
pull the power cord or switch the receiver o.
Maincodel, All Code and Keydata
Only for use by the factory.
USB Backup Only option is User DB (User Database). Connect a USB device and select Start,
press OK to write DB to the USB device.
NOTE: Never interrupt a Database writing. Do not unplug the USB device. Do not
pull the power cord or switch the receiver o.
Other
Timer Mode Timer for Auto StandyDefault is On Set to O if you do not want this feature.
Auto Standy As a power saving feature, the unit will switch to Standby automatically, if no
command from the remote control is received for the set time. Default is 3
hours.
15
English
To Next Page
Loading...
