1 About this manual
Instruction Manuals
Struers equipment must only be used in connection with and as described in the Instruction
Manual supplied with the equipment.
Note
Read the instruction manual carefully before use.
Note
If you wish to view specific information in detail, see the online version of this
manual.
2 Safety
2.1 Intended use
The cooling system is intended for filtration, cooling and recirculation of cutting fluid containing
waste from machining of materials. The system is designed for use with Struers grinding,
mounting and cutting machines.
The machine is for use in a professional working environment (e.g. a materialographic
laboratory).The machine must be operated only by skilled/trained personnel.
The device is designed to be used with Struers consumables specially designed for this purpose
and this type of device.
A signal from the machine it supports is required for the cooling system to function as intended.
Do not use the machine for
the following
Filtration of any type of explosive and/or flammable material, or
materials which are not stable during machining, heating or
pressure. Furthermore, the machine must not be used with
consumables (cutting fluids, filter materials) that are not
compliant with function and materials of the cooling system*.
Pumping of any type of explosive and/or flammable material, or
materials which are not stable during machining, heating or
pressure.
Furthermore, the machine must not be used with consumables
(cutting fluids) that are not compliant with function and
materials of the Cooling System.
Model Cooli System
1 About this manual
Cooli System 5
To Next Page
