CAUTION
The cooling unit will be very heavy when it is full.
Place the cooling unit in its final position, or make sure that you can easily push it
into position before filling the tank.
CAUTION
Always wear protective gloves and safety goggles when you clean and fill up the
tank.
CAUTION
Avoid skin contact with the cooling fluid additive.
3 Transport and storage
If, at any time after the installation, you have to move the unit or place it in storage, there is a
number of guidelines we recommend that you follow.
• Package the unit securely before transportation.
Insufficient packaging could cause damage to the unit and will void the warranty. Contact
Struers Service.
• We recommend that you keep all original packaging and fittings for future use.
3.1 Transport
• Clean and dry the filter unit and tank.
• Disconnect the unit from the electrical power supply.
• Disconnect the water inlet and the water outlet.
Transporting the unit to a new location
• Lift the cooling system onto a pallet and move to its new location.
• At the new location, make sure that the facilities required are in place.
3.2 Long-term storage or shipping
Note
We recommend that you keep all original packaging and fittings for future use.
• Disconnect the control unit from the electrical power supply.
• Disconnect the water inlet and the water outlet.
• Clean the machine and all accessories thoroughly.
• Remove the control unit, the pump and the water level gauge. Place the items in a box.
3 Transport and storage
Cooli System 9
To Next Page
Loading...