Service Information
13
BIG WHEEL REMOVAL
Required Tools:
Large Standard Screwdriver Small Standard Screwdriver String or Bungee Cords
1. Lift the base hood and separate the Velcro holding it to the base frame. Support the hood from the litter
using bungee cords so it is out of the way.
2. Using a large, standard screwdriver, pop off the big wheel cover (A).
3. Using a small, standard screwdriver, remove the spiral retaining ring (B) from the groove on the Big Wheel
axle.
4. Remove the Big Wheel (C).
5. Reverse steps 1−4 to reinstall the Big Wheel.
A
B
C
Return to Table of Contents
To Next Page
Loading...
