Siderail Operation Guide
1−11
OUTSIDE SIDERAIL CONTROLS (CONTINUED)
9. Push to lower the head end of the bed (Trendelenburg position). This function is also used for pelvic tilt.
NOTE
When the bed is at a low height and the Trendelenburg button is pressed, the litter may raise automatically
to provide adequate clearance. The “BED UP” LED on the siderail will flash to indicate activation.
10. Push to raise the head end of the bed and/or return the bed to level.
11. Push repeatedly to toggle the siderail lights to different settings:
A. LOW
B. MEDIUM
C. HIGH
D. NURSE CALL ONLY
E. OFF
12. Press to activate Nurse Call.
13. Push to lock out all bed motion. Push again to unlock. The LED will light when bed motion is locked.
14. Lights when the bed is plugged into the wall socket. Blinks if the Nurse Call battery needs to be replaced.
To Next Page
Loading...
