Stryker MV3 5900 Maintenance Manual

EErrrroorr ccooddeess
Error codes are detailed in the table below.
EErrrroorr ccooddee CCaauussee
TTrroouubblleesshhoooottiinngg
0.02 Error on non volatile memory
(nvm)
1. Reboot product
2. Replace MCU
0.03 Watchdog switch in wrong position or broken
(comWatchdogDisabled)
1. Toggle watchdog switch on MCU
0.04 Software version mismatched or missing board
(softwareVersionMismatch)
1. Reboot product
2. Check for a missing board error, if missing take
corrective action on cable or board
0.05 Brake switch malfunction
(brake)
1. Check brake cable and switch
0.06 Obstruction switch malfunction
(obstruction)
1. Check each of the four obstruction switches and
cables
0.07 CPR switch/cable malfunction
(cprHandle)
1. Check CPR switch, cable, and head actuator
0.08 FSC_KPD board is not responding
(FSC_KPD_missing)
1. Check cable
2. Check AVB board (electrical issue)
0.09 FSC_GUI board is not responding
(FSC_GUI_missing)
1. Check cable
2. Check FSC_KPD
• Software in bootloader mode
• Software incorrect
• Electrical issue
3. AVB board (electrical issue)
0.1 SRK PL board is not responding
(SRK_PL_missing)
1. Check cables
2. Check junction boards
3. Check SRK board
4. Check SRC (software and electrical)
0.11 SRK PR board is not responding
(SRK_PR_missing)
1. Check cables
2. Check junction boards
3. Check SRK board
4. Check SRC (software and electrical)
0.12 PSI board is not responding
(PSI_missing)
1. Check cables
2. Check junction boards
EN 12 5900-009-002 Rev A.0

Stryker MV3 5900 Specifications

General

Brand	Stryker
Model	MV3 5900
Category	Medical Equipment
Language	English