Stryker MV3 5900 Maintenance Manual

MMaaiinntteennaannccee mmeennuu
The maintenance menu provides access to the following settings:
• Language
• Set clock
• Actuator maintenance
• Scale maintenance
• Angle maintenance
• Width maintenance
• Patient station
• Maintenance log
• Clear maintenance log
• Test modes
• Battery maintenance
To access the maintenance menu:
1. On the footboard control panel, press EEnntteerr to access the SSeettttiinnggss menu.
2. Highlight MMaaiinntteennaannccee and press EEnntteerr.
3. Use the up and down arrow buttons to highlight each number.
4. Press EEnntteerr to increase the number.
NNoottee -- The number will increase to 9 until it resets to 0.
5. The maintenance code is as follows: 2, 4, 6
6. Highlight PPrroocceeeedd and press EEnntteerr to access the maintenance menu.
LLaanngguuaaggee
To change the display language:
1. Enter the
Maintenance menu (page 20).
2. Highlight LLaanngguuaaggee and press EEnntteerr.
3. Highlight the desired language and press EEnntteerr.
SSeett cclloocckk
To change the product clock:
1. Enter the
Maintenance menu (page 20).
2. Highlight SSeett cclloocckk and press EEnntteerr.
3. In the clock setting menu you will see the following options:
• Year
• Month
• Day
• Hour
• Minute
4. Use the up and down arrow buttons to highlight each option and press EEnntteerr to set.
EN 20 5900-009-002 Rev A.0

Stryker MV3 5900 Specifications

General

Brand	Stryker
Model	MV3 5900
Category	Medical Equipment
Language	English