EErrrroorr ccooddee CCaauussee
TTrroouubblleesshhoooottiinngg
1.29 SMB head configuration error
(SMB Head Config)
1. Load cell missing
2. EEPROM error on board
3. Secondary scale missing (also will set 0.25)
4. WD switch position
1.3 SMB foot configuration error
(SMB Foot Config)
1. Load cell missing
2. EEPROM error on board
3. Secondary scale missing (also will set 0.25)
4. WD switch position
1.31 AVB configuration error
(AVB Foot Config)
1. WD switch position
5900-009-002 Rev A.0 17 EN