EasyManua.ls Logo

Stryker Neptune 2 - Instructions for Use: Operation Monitoring; Operate Rover and Handle Overfill

Stryker Neptune 2
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 www.stryker.com
2008/04 0702-014-700 Rev-B
Specifications
RecommendedseparationdistancesbetweenportableandmobileRFcommunicationsequipmentandtheNeptune 2 Docker
TheNeptune 2 Dockers,REF0702-014-000andREF0702-015-000,areintendedforuseintheelectromagneticenvironmentinwhichradiatedRF
disturbancesarecontrolled.ThecustomerortheuseroftheNeptune 2 Dockercanhelppreventelectromagneticinterferencebymaintaining
aminimumdistancebetweenportableandmobileRFcommunicationsequipment(transmitters)andtheNeptune 2 Docker as recommended
below,accordingtothemaximumoutputpowerofthecommunicationsequipment.
Ratedmaximumoutputpowerof
transmitter
W
Separation distance according to frequency of transmitter
m
150kHzto80MHz 80MHzto800MHz 800MHzto2.5GHz
0.01 0.12 0.12 0.23
0.1 0.37 0.37 0.74
1 1.17 1.17 2.33
10 3.70 3.70 7.37
100 11.70 11.70 23.30
Fortransmittersratedatamaximumoutputpowernotlistedabove,therecommendedseparationdistancedinmeters(m)canbeestimatedusingthe
equationapplicabletothefrequencyofthetransmitter,wherePisthemaximumoutputpowerratingofthetransmitterinwatts(W)accordingtothe
transmitter manufacturer.
NOTE1:At80MHzand800MHz,theseparationdistanceforthehigherfrequencyrangeapplies.
NOTE2:Theseguidelinesmaynotapplyinallsituations.Electromagneticpropagationisaffectedbyabsorptionandreflectionfromstructures,objectsand
people.

Other manuals for Stryker Neptune 2

Related product manuals