What to do if Stryker Visum Medical Equipment camera does not transmit an image and cannot be controlled through the Wall Control?
First, ensure the camera is correctly installed, and wait 90 seconds before turning it on at the wall control. Then, check both the power and communication connections. If you are using an HD camera, verify that the decoder assembly is connected to the video output.
Why does the Stryker Visum Medical Equipment camera image look mostly green/blue/red?
If the camera image appears mostly green, blue, or red, you should adjust the White Balance in the camera settings. Also, check your monitor settings to ensure they are properly configured.
What to do if Stryker Visum Medical Equipment camera control does not function but the camera image is visible?
If the camera image is visible but the camera control does not function, verify that Light 1 is connected to Control Port 1 and not Port 2.
What to do if Stryker Medical Equipment camera does not transmit an image but can be controlled through the Wall Control Panel?
If your camera does not transmit an image but can be controlled through the Wall Control Panel, inspect the video connection.
General| Category | Medical Equipment |
|---|---|
| Type | Mobile C-Arm |
| Manufacturer | Stryker |
| Model | Visum |
| Power Requirements | 50/60 Hz |
| Applications | Orthopedic, Pain Management |
Details personal safety risks and essential precautions for using the surgical light system.
Outlines important precautions for installation, use, and maintenance to prevent damage or malfunction.
Describes the Visum® Blade LED Surgical Light System's features and components for surgical illumination.
Specifies the purpose of the surgical light system in illuminating operative sites.
Guides on powering the lights and adjusting brightness via handle or control panel.
Explains how to control lights and camera using the wall-mounted panel.
Detailed instructions for cleaning and sterilizing handle and camera covers.
Outlines routine maintenance tasks for hospital and Stryker personnel.
A quick guide for common brake screw adjustment behaviors and solutions.
Step-by-step guide to adjust brake screws on the extension arm for proper movement.
Instructions for adjusting the spring arm tension for vertical light head movement.
Procedure for removing and replacing brake screws, including lubrication.
To Next Page
