7
S
2. About Your Product
2.1 Product Description
The Visum® Blade LED Surgical Light System is suitable for all major and minor surgical procedures in
operating rooms and all other healthcare facilities where the need for illumination exists. The light intensity
is variable up to 160,000 Lux. The light quality is based upon high quality LED’s to provide cool light with
reduced shadow resolution.
A system consists of 1-4 light heads supported by a pivoting suspension system that is attached to the
health care facility’s super structure by a mounting plate. The system requires at least one of the following:
a power supply box, ceiling cover, drop tube, central axis and spring arm. The system may include optional
end eectors such as but not limited to monitor mounts. The mounting plates may be congured to
accommodate a single or tandem mount suspension system.
Independent control of each light’s intensity is via the light handle. An optional electronic wall control
panel may be installed in the operating room for control by non-sterile users. The Visum® Blade LED
Surgical Light System allows for an in-light camera option that may be added to a light head. This option
requires a wall control for camera operation.
2.2 Intended Use
• The Visum® Blade LED Surgical Light is intended to illuminate the operative site during surgical
procedures with high intensity light.
• The Visum® Blade LED Surgical Light system is not intended to interact or contact any part of the
patient’s body or tissue.
• The primary users are hospital sta including doctors and nurses. Cleaning personnel also engage the
equipment when performing routine cleaning.
2.3 Indications for Use
The Visum® Blade LED Surgical Light System is indicated to be used with various mounting congurations in
operating rooms, examination rooms, emergency rooms, and all other health care facilities where the need
for additional illumination exists.
2.4 Intended patient population
Any patient receiving a surgical procedure requiring illumination of the surgical site.