Stryker Visum User Manual

14
S
5.2.2 Sterilizable Camera Cover (Optional Component)
Attaching the Sterilizable Camera Handle to the
SD Camera
1. Slide the Sterilizable Handle over the SD
Camera.
2. Twist and push the Sterilizable Handle Cover
until you hear a click. The click indicates that the
handle cover is securely fastened.
Attaching the Sterilizable Camera Handle to the
HD Camera
1. Slide the Sterilizable Handle over the HD
Camera.
2. Align the hole in the handle cover with the
release button on the HD camera.
Release
Button
Camera
Sterilizable
Handle Cover
Sterilizable Camera Cover
3. Make sure the release button ts onto the hole on the sterilizable handle. This ensures that the
handle is locked
Warning
Do not touch the light handle, camera, or button when attaching the cover as they are not sterile.
Removing the Sterilizable Camera Handle
1. Press the release button on the camera.
2. Slide the handle down and o.
5.3 Turning on and Adjusting the Intensity of the Lights
The lights can be controlled using the light head handle or the optional wall control panel.
5.3.1 Light Head Handle
Power
• To power on the light, turn the light head handle clockwise and release.
• To power o the light, turn the light head handle counterclockwise until it stops, and then hold it
until the light shuts o (approximately 4 seconds).
Intensity
• Turn the handle on the light clockwise and release to increase the brightness.
• Turn the handle on the light counterclockwise and release to decrease the brightness.

Stryker Visum Specifications

General

Category	Medical Equipment
Type	Mobile C-Arm
Manufacturer	Stryker
Model	Visum
Power Requirements	50/60 Hz
Applications	Orthopedic, Pain Management