Stryker Power-LOAD User Setup Manual

54 6390-009-001 REV B www.stryker.com
Return To Table of Contents
Figure 40 Figure 41
Operation Guide
UNLOADING A PERFORMANCE-PRO COT FROM A VEHICLE (MODEL 6085/6086 WITH THE POWER-
LOAD OPTION) (CONTINUED)
7. Press the down (È) button on the Power-LOAD control panel to lower the lifting arms and cot as shown in Figure
40
8. Lift one of the two red manual cot release handles at the head end of the trolley to unlock the cot as shown in
Figure 41.
9. Raise the lifting arms and guide the trolley into the vehicle patient compartment until the arms are far enough in
to not interfere with the vehicle doors.

Stryker Power-LOAD Specifications

General

Load Capacity	700 lbs (317.5 kg)
Battery Type	Sealed Lead Acid
Charging Time	8 hours
Compatibility	Stryker ambulance cots
Power Source	Battery
Lifting Mechanism	Hydraulic