Stryker Power-LOAD User Setup Manual

56 6390-009-001 REV B www.stryker.com
Return To Table of Contents
LOADING A POWER-PRO COT INTO A VEHICLE (MODEL 6500/6506 & 6510/6516 WITH THE POWER-
LOAD OPTION) (CONTINUED)
Operation Guide
6. Press and hold the retract (–) button on the cot control
switch, as shown in Figure 45, to fully retract the cot
undercarriage until the cot is supported.
7. Push the cot into the vehicle patient compartment
until the lifting arms lower and the cot locks into
Power-LOAD.
8. Ensure that the cot is locked into Power-LOAD by firmly
pulling on the foot end of the cot.
Figure 45

Stryker Power-LOAD Specifications

General

Load Capacity	700 lbs (317.5 kg)
Battery Type	Sealed Lead Acid
Charging Time	8 hours
Compatibility	Stryker ambulance cots
Power Source	Battery
Lifting Mechanism	Hydraulic