Stryker VisionPro - Rear Panel Components; Rear Panel Features

6
Rear panel
2
4
5
3
9
6
10
8
1
11
12
7
1. Accessory mount Provides an access point for mounting optional
accessories.
2. VESA mounting holes Provide access points for mounting the display.
3. Power switch (hard) Powers the input DC power ON and OFF.
4. Power connector Connects to the 24V DC power supply.
5. Handles Aid in display positioning.
Caution: The handles are not intended to bear the
entire weight of the display
6. Cable cover hinges Attach the bottom of the cable cover to the display.
7. Velcro straps Straps aid in cable management.
8. Cable cover thumbscrews Attach the cable cover to the display, and are
tightened or loosened using  ngers.
9. Cable cover Covers and conceals cables.
10. Cable cover clips Attach the top of the cable cover to the display.
11. Cable wrap Provides a location for wrapping cables.
12. Locking feature A locking mechanism or cable may be routed here
for security purposes.