Strymon NIGHTSKY - Rear Panel - Rear Panel I;O and Control; INPUTS; OUTPUTS; INPUT MODE

NightSky - Time-Warped Reverberator
pg 13
Rear Panel - Rear Panel I/O and Control
DRYLOW CUT HIGH CUT INTERVAL SHIMMER
REVERBSPEED DEPTH LENGTH SIZE
/ PITCH
rand
env
-8va
-5th
-2nd +2nd
+5th
+8va
-4th +4th
TARGET
FILTER GLIMMER DRIVESHIMMER
SHAPE TEXTURE QUANTIZE
pre
post
smooth
half step
scale
verb
pitch
filter
sparse
dense
diuse
high
low
input
regen
regen
low
pass
TONE VOICE
MOD DECAY MIX
ON INFINITE
hold (morph) hold (sequence)
sequence step
sequence tap
FAVORITE
LEFT IN RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUTINST
LINE
9VDC
INPUT MODE
Sets the input level to the effect processing. Use INST for guitars or
instruments with lower output. Setting to LINE adds 10dB of clean
headroom. Use LINE input mode with synthesizers, amplifier and
mixer effects loops, or guitar rigs with high output levels if more clean
headroom is desired.
INPUTS
High impedance ultra low-noise
discrete Class A JFET preamp
inputs. Use LEFT IN for mono
input.
OUTPUTS
Low impedance stereo outputs.
Use LEFT OUT for mono output.
NOTE: With mono input using LEFT IN, output
can be either mono (LEFT OUT) or stereo.