Strymon NIGHTSKY - Power Up Modes; BYPASS MODE; PERSIST; OUTPUT SUM

NightSky - Time-Warped Reverberator
pg 29
Power Up Modes
Global parameters and functions can be accessed via a power up
procedure. All power up functions persist through power cycles.
Press and hold the INFINITE footswitch while connecting power
to the pedal. Once the three footswitch LEDs light up, release the
footswitch.
Adjust the desired functions with the knobs and buttons noted
below.
Press any footswitch to exit power up mode.
1
2
3
BYPASS MODE
Press PRESET BUTTON 1, LED color indicates status.
True Bypass = GREEN (default)
Buffered Bypass = RED Preserves the high frequency response of
your guitar signal through your pedal chain and long cable runs.
PERSIST
Press PRESET BUTTON 2, LED color indicates status.
Persist ON = GREEN Reverb in the buffer will persist when the
pedal is bypassed or a new preset is loaded. Enabling Spillover
automatically puts NightSky into Buffered Bypass mode.
Persist OFF = RED (default) Reverb in the buffer will stop when the
pedal is bypassed or a new preset is loaded.
OUTPUT SUM
Press PRESET BUTTON 3, LED color indicates status.
Output Sum OFF = GREEN (default) Output is stereo.
Output Sum ON = RED Sums the output signal to mono. Use LEFT
OUT for summed mono signal.