Strymon NIGHTSKY - External Control - Expression Pedal Setup

NightSky - Time-Warped Reverberator
pg 32
DRYLOW CUT HIGH CUT INTERVAL SHIMMER
REVERBSPEED DEPTH LENGTH SIZE
/ PITCH
rand
env
-8va
-5th
-2nd +2nd
+5th
+8va
-4th +4th
TARGET
FILTER GLIMMER DRIVESHIMMER
SHAPE TEXTURE QUANTIZE
pre
post
smooth
half step
scale
verb
pitch
filter
sparse
dense
diuse
high
low
input
regen
regen
low
pass
TONE VOICE
MOD DECAY MIX
ON INFINITE
hold (morph) hold (sequence)
sequence step
sequence tap
FAVORITE
LEFT IN RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUTINST
LINE
9VDC
Use a TRS Expression pedal to control the knobs of NightSky.
External Control – Expression Pedal Setup
Configure the EXP jack for Expression mode.
(See page 15 for details.)
Connect the Expression pedal to the EXP jack of NightSky
using a TRS cable.
Press and hold the PRESET BUTTONS 1 & 8 together for one
second until all the PRESET BUTTONS are flashing GREEN.
Rock the expression pedal back to the HEEL position and
PRESET BUTTONS 1-4 will flash GREEN.
1
2
3
4