NightSky - Time-Warped Reverberator
pg 33
External Control – Expression Pedal Setup (cont.)
Set the knobs the way you would like them to be in
the HEEL position. Once a knob is turned, PRESET
BUTTONS 1-4 will flash RED.
Rock the expression pedal forward to the TOE position
and PRESET BUTTONS 5-8 will flash GREEN.
Press any PRESET BUTTON to store and exit setup.
Buttons will stop flashing.
Set the knobs the way you would like them to be in
the TOE position. Once a knob is turned, PRESET
BUTTONS 5-8 will flash RED.
5
6
7
8
NOTE: Expression pedal settings are saved and
recalled as part of the onboard favorite setting
and MIDI accessible presets.
We recommend using an expression pedal with a
25k Ohm minimum potentiometer.
To Next Page
Loading...
