Strymon NIGHTSKY - Factory Reset

NightSky - Time-Warped Reverberator
pg 40
Factory Reset
Restore the pedal to factory power up modes and Live Edit Functions.
Turn LENGTH knob from 0-100% and back two (2) times. The
FAVORITE LED will change colors at the extremes of the knob
range and blink RED to indicate when the reset is taking place.
Turn 1: AMBER LED
Turn 2: RED LED
Turn 3: AMBER LED
Turn 4: All three footswitch LEDs flash RED, NightSky resets and
restarts.
Press and hold the ON footswitch while powering up the pedal.
Once the ON LED starts flashing, release the footswitch.
1
2
DRYLOW CUT HIGH CUT INTERVAL SHIMMER
REVERBSPEED DEPTH LENGTH SIZE
/ PITCH
rand
env
-8va
-5th
-2nd +2nd
+5th
+8va
-4th +4th
TARGET
FILTER GLIMMER DRIVESHIMMER
SHAPE TEXTURE QUANTIZE
pre
post
smooth
half step
scale
verb
pitch
filter
sparse
dense
diuse
high
low
input
regen
regen
low
pass
TONE VOICE
MOD DECAY MIX
ON INFINITE
hold (morph) hold (sequence)
sequence step
sequence tap
FAVORITE
LEFT IN RIGHT IN LEFT OUT RIGHT OUT EXP
MIDI IN
USB
MIDI OUTINST
LINE
9VDC