Strymon NIGHTSKY - MIDI;Preset Mode; Preset Scroll Mode; MOD;TONE;VOICE Bypass Mode

NightSky - Time-Warped Reverberator
pg 35
Configuring and using MultiSwitch Plus with NightSky.
External Control – MultiSwitch Plus (cont.)
Press and hold the
A footswitch on
Multiswitch Plus when
connecting the TRS
cable to MultiSwitch
Plus for Preset mode.
OR
Press and hold the C footswitch
on MultiSwitch Plus when
connecting the TRS cable to
MultiSwitch Plus for Preset
Scroll mode or MOD/TONE/
VOICE Bypass Mode.
Multiswitch Plus will now function according to the
EXP jack mode you have chosen in step three.
5
6
MIDI/Preset Mode
Preset Scroll Mode
MOD/TONE/VOICE
Bypass Mode
Preset 2
Previous
Preset
MOD
On/Off
Preset 3
On/Bypass
TONE
On/Off
Preset 4
Next
Preset
VOICE
On/Off
NOTE: If NightSky is in Sequence mode, loading a new preset will
stop the sequence and cause the pedal to switch to Reverb mode.
NOTE: In MOD/TONE/VOICE Bypass Mode, the LEDs for each
section will turn off when it is bypassed. These bypass settings
can be saved to a preset, however, the LEDs for all sections will
be lit when you recall the preset regardless of the bypass state.
A B C