Riverside - Multistage Drive
®
pg 20
Use a TRS Expression pedal to control the knobs of Riverside
Press and hold both FAVORITE
and ON footswitches for a few
seconds until both LEDs begin
blinking GREEN.
Connect the Expression pedal to
the EXP jack of Riverside using
a TRS cable.
NOTE: It is also possible to
assign the BOOST jack as the
input for Expression mode.
This is useful if you wish to
connect MIDI to the EXP jack,
but still wish to use a pedal to
control Expression. (See page
14 for details about assigning the
BOOST jack.)
2
1
External Control – Expression Mode
To Next Page
Loading...
