Riverside - Multistage Drive
®
pg 21
Rock the expression pedal back to the
HEEL position and only the FAVORITE
LED will blink GREEN.
Set the knobs the way you would like
them to be in the HEEL position. The
FAVORITE LED will turn RED to indicate
that the setting has changed.
Rock the xpression pedal forward to the
TOE position and only the ON LED will
blink GREEN.
Set the knobs you would like to control
to the setting for the TOE position of
the expression pedal. The ON LED will
turn red to indicate that the setting has
changed.
Press the FAVORITE or ON footswitch
once to save the expression settings.
3
4
5
6
7
External Control – Expression Mode
(cont.)
NOTE: Expression pedal settings
are saved and recalled as part of the
on-board Favorite setting and MIDI
accessible presets.
NOTE: If you are using the EXP jack for
MIDI communication, it is possible to
connect the pedal to the BOOST jack
instead to use an expression pedal. (See
page 14 for details on configuring the BOOST
jack for Expression mode.)
To Next Page
Loading...
