Studer Innotec SA
RCC-02/-03
26 V4.4.0 User manual
10.11.3 Duration of display for quick messages {5011}
Messages of low importance are displayed for a limited period. This adjustment enables you to adapt
this duration at your convenience.
10.11.4 Acoustic alarm {5027}
In the event of an alarm an acoustic signal is activated. You can always deactivate this signal by
using this configuration.
10.11.5 Remote control acoustic alarm duration {5031}
This parameter enables to adjust the remote control acoustic alaorm duration (in seconds).
10.11.6 Switching on and off of system on level View only {5056}
If this parameter is deactivated, it is not possible anymore to put the installation ON or OFF with the
remote control, should it be at level « view only ».
To Next Page
Loading...
