Studer Innotec SA
RCC-02/-03
2 V4.4.0 User manual
10.8.5 Advanced backup functions {5069} ......................................................................................... 24
10.9 Adjusting the contrast ...................................................................................................................... 25
10.10 Back-lighting {5007} .......................................................................................................................... 25
10.10.1 Backlight modes {5093} ............................................................................................................ 25
10.10.2 Duration of the back-lighting {5009} ...................................................................................... 25
10.10.3 Red back-lighting if the Xtender is OFF and if there is a fault {5026} ............................... 25
10.11 Extended and special functions {5021} ........................................................................................ 25
10.11.1 Choice of the display by default {5073} ............................................................................... 25
10.11.2 Inactivity period before returning to the standard display {5010} ................................... 25
10.11.3 Duration of display for quick messages {5011} .................................................................... 26
10.11.4 Acoustic alarm {5027} ............................................................................................................... 26
10.11.5 Remote control acoustic alarm duration {5031} ................................................................. 26
10.11.6 Switching on and off of system on level View only {5056}................................................. 26
11 Information on the operating mode of the installation .................................................................. 27
11.1 Display of the parallel and three-phase systems ........................................................................ 29
12 Messages and account of events .................................................................................................... 30
12.1 (000) Warning: Battery voltage low ............................................................................................... 30
12.2 (003) AC-In synchronization in progress ........................................................................................ 30
12.3 (004) Input frequency AC-In wrong ............................................................................................... 31
12.4 (006) Input voltage AC-In too high ................................................................................................ 31
12.5 (007) Input voltage AC-In too low ................................................................................................. 31
12.6 (008) Halted: Inverter overload SC ................................................................................................ 31
12.7 (014) Halted: Over temperature EL ............................................................................................... 31
12.8 (015) Halted: Inverter overload BL ................................................................................................. 32
12.9 (016) Warning: Fan error detected ................................................................................................ 32
12.10 (018) Warning: Excessive battery voltage ripple ......................................................................... 32
12.11 (019) Halted: Battery under voltage.............................................................................................. 32
12.12 (020) Halted: Battery overvoltage ................................................................................................. 32
12.13 (021) Input limit reached, no transfer ............................................................................................ 32
12.14 (022) Error: Voltage presence on AC-Out .................................................................................... 33
12.15 (023) Error: Inverter phase not defined ......................................................................................... 33
12.16 (024) Check the clock battery ....................................................................................................... 33
12.17 (041) Warning: Overtemperature TR ............................................................................................. 33
12.18 (042) Halted: Unauthorized energy source at the output ......................................................... 33
12.19 (058) Error: Synchronization with master lost ................................................................................ 33
12.20 (059) Halted: Inverter overload HW ............................................................................................... 33
12.21 (060) (061) Warning: Time security for auxiliary contacts .......................................................... 34
12.22 (062) Warning: Genset, no AC-In coming after AUX command ............................................. 34
12.23 Stored events ..................................................................................................................................... 34
13 Data logging ....................................................................................................................................... 35
13.1 Functioning ......................................................................................................................................... 35
13.2 Analysis and visualization of the data with the XTENDER Data Analysis Tool ........................ 35
14 Setting of the Xtender ........................................................................................................................ 36
14.1 General ............................................................................................................................................... 36
14.2 Configuration on a system with several Xtenders ...................................................................... 36
14.3 Utilisation and access levels ............................................................................................................ 36
14.4 Pre-defined functions of the auxiliary relays ................................................................................ 36
14.5 Access to the parameters ............................................................................................................... 37
14.5.1 Access to a parameter by its number ...................................................................................... 37
14.5.2 Access to a parameter via the menu ....................................................................................... 37
14.6 INSTALLER - Utilisation and access levels ...................................................................................... 38
14.7 Basic settings {1100} .......................................................................................................................... 38
14.7.1 Setting of the basic parameters by means of the potentiometer in the XTS {1551} ........ 38
14.7.2 Maximum current of the AC source (Input limit) {1107} ......................................................... 39
14.7.3 Charge current {1138} .................................................................................................................. 39
14.7.4 Smart boost authorized {1126} .................................................................................................... 40
14.7.5 Authorized inverter {1124} ............................................................................................................ 40
14.7.6 Type of detection of the grid loss (AC-In) {1552} .................................................................... 40
To Next Page
Loading...
Need help?
General