Built-In
Built-In
(600-
(600-
2
2
)
)
Series
Series
Troubleshooting Guides
8-15
#3758407 - Revision B - August, 2006
PROBLEM POSSIBLE CAUSE TEST / ACTION
O. "ICE" and “SERVICE”
Flashing on LCD
Water Valve Energized Longer then
Fifteen Seconds
Check icemaker area for jammed ice cube,
clear jam if present. Check levelness of ice-
maker, level if needed. Check position of fill
cup. Reposition if in ice path.
Check water supply pressure; must be con-
stant 20-100 PSI. If not, instruct customer.
Check water valve operation, opens when
115V AC is applied, closes completely when
115V AC is removed. Water valve Ohms =
160. Replace if defective.
To Next Page
Loading...
Need help?
General
