Legacy U.S.A. (66L) A2260BE–B
5-12
B Tape travel indicators
These indicate the direction the cassette tape is moving.
" : Indicates that the top side of the cassette is being played back.
A : Indicates that the bottom side of the cassette is being played
back.
B Program button (PROG)
When the program button
Y is pressed during playback, the tape
travel indicators will switch and the player will begin playing back the
opposite side of the tape. The same mechanism is automatically acti-
vated when the end of the tape is reached. This allows the opposite
side of the tape to play, providing continuous playback.
B Fast-forward button (FF)
To fast-forward the tape, press the “FF” button
E. To stop fast-for-
warding, lightly press the “
” 8 button.
B Rewind button (REW)
To rewind the tape, press the “REW” button
R. To stop rewinding,
lightly press the “
” 8 button.
B Eject button (
)
When “
” button 8 is pressed, playback stops and the cassette
tape is ejected.
The ejection function is also active when the ignition switch is in the
“LOCK” position. Always make certain that you remove the cassette
tape.
B Repeat (RPT)
Press the “RPT” button
W while a song is playing to play the song
repeatedly. The “RPT” indicator will come on and the song will be
played continuously. To cancel the repeat mode, press the button
again. Then the “RPT” indicator goes out, and normal playback mode
is restored.
To Next Page
Loading...
