MEMORY DRIVER’S SEAT (if equipped)
You can set the seat and outside mirror position and retrieve them
using the buttons on the driver’s door or the access key fob. You
can learn more about setting and retrieving your seat and mirror
positions from the how-to video linked in the QR code and the
following steps.
To set a seat position with a
button:
1. Make sure the select lever is in
the “P” position, with the
parking brake applied and the
ignition in the “ON” position.
2. Adjust your seat and outside
mirrors to the desired position.
3. Register the position by either
of the following procedures:
• Press the “SET” button, and
then press and hold either
button “1” or “2”. A chirp
sounds when the position is
registered.
• While holding the “SET” button, press and hold either button “1” or “2”. A chirp sounds
when the position is registered.
Memory Seat Buttons
HOW TO APPENDIX
146
To Next Page
Loading...
