MEMORY HEIGHT (if equipped)
With the Memory Height function, you can set where the Power
Rear Gate gate stops when it opens. This is a great feature to limit
the upward travel of the rear gate to ensure you can reach it or to
prevent the rear gate from contacting a garage ceiling. You can
learn more about setting the Power Rear Gate Memory Height from
the how-to video linked in the QR code and the steps below.
To set the height:
1 On the Center Information Display (CID),
press the “Home” Button.
2 Select “Settings”.
3 Navigate to the “Car” tab.
4 Find and select “Power Rear Gate”.
5 Turn off “Power Rear Gate Memory”.
HOW TO APPENDIX
144
To Next Page