64
Dive planner
STOP
NO
DECO
CNS O2%
DEPTH
DIVE TIME
Set desired bottom time with
and
3. “Add” asks that you set the bottom time. This is done with and . Subgear XP-3H
calculates the decompression information for this set bottom time. If an MB level (L1-5) is selected,
Subgear XP-3H calculates the level stop data.
CNS O2% values higher than 199% will be displayed as 199 %.
Ascent time greater than 99 minutes is displayed as “ – – ”
Deco stop depth deeper than 27m (90ft) is displayed as “ – – : – – ”
CNS O2 equal or greater than 75%: CNS O2% symbol starts fl ashing
CNS O2 equal or greater than 100%: CNS O2% symbol and CNS O2% value are fl ashing.
MB level stop deeper than 27m (90ft): MB level will be reduced.
2 Leaving the dive planner
By pushing once or twice you can exit the dive planner. This also occurs after three minutes
without operation.
To Next Page
Loading...