SUBITO ARGON 18 - iWoc One Assembly; Insert iWoc Remote into Cap; Tighten Remote Assembly

22
SUBITO 314A / 314B: ASSEMBLY GUIDE
Secure the iWoc one remote to the top tube button cap.
1. Disassemble the iWoc one remote (SKU: 81231) from the one remote
flat holder.
2. Place the button cap clip (SKU: 81243) in the top tube button cap (SKU: 81236).
3. Insert the iWoc one remote through the cover and button cap clip.
4. Install the one remote nut and turn clockwise approximately 3 turns.
5. Hold the iWoc one remote and turn the top tube button cap until
the assembly is tight.
11.5 Iwoc One Assembly
81231
81243
81236