Need help?Do you have a question about the SUBITO ARGON 18 and is the answer not in the manual?
Mounting the seat post collar onto the frame.
Placing the seat post into the frame.
Securing the seat post collar with its bolt.
Loosening clamp bolts to fit saddle rails.
Tightening bolts to set saddle angle.
Attaching the derailleur hanger to the frame.
Using a gauge to ensure proper alignment.
Attaching the front derailleur hanger to the frame.
Placing the battery through the bottom bracket area.
Fastening the battery using M5 screws.
Mounting the charging port to the frame.
Inserting the fork into the head tube.
Using specific screws to mount the disc rotor.
Tightening the disc rotor screws to 4Nm.
Securing the motor with the lock nut.
Replacing cassette lockring with magnet locknut.
Tightening the cassette locknut to 40Nm.
Securing the drive side motor lock nut.
To Next Page
General