Subsite 910R - Page 48

48 910R/950R/950T/970T - OPERATION
LOCATE LINE: ACTIVE LOCATION
48 910R/950R/950T/970T - OPERATION
LOCATE LINE: ACTIVE LOCATION
Induction Clamp
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
NOTICE: Electric shock or equipment damage can result if
transmitter is connected directly to live cable. Contact qualified
utility personnel and follow all local standards and restrictions for
disconnecting and grounding lines.
To set up transmitter for use with induction clamp:
1. Plug cable into transmitter.
2. Place clamp around line.
3. Turn on transmitter.
4. Check battery level.
5. Choose frequency and shutoff time. See “Choose
Frequency” earlier in this chapter.
Induction Clamp
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
NOTICE: Electric shock or equipment damage can result if
transmitter is connected directly to live cable. Contact qualified
utility personnel and follow all local standards and restrictions for
disconnecting and grounding lines.
To set up transmitter for use with induction clamp:
1. Plug cable into transmitter.
2. Place clamp around line.
3. Turn on transmitter.
4. Check battery level.
5. Choose frequency and shutoff time. See “Choose
Frequency” earlier in this chapter.