SECTION 6 1600C LP USER MANUAL
71
3. ANNUAL ENGINE VIBRATION MOUNT INSPECTION
At least annually inspect engine vibration mounts for security of attachment and to make sure the resilient parts are intact.
DO NOT operate compressor with defective engine mounting system. Remove and replace defective parts by ordering
with part numbers indicated in Parts List.
Maintenance Performed
By
Location
Date
Maintenance Performed
By
Location
Date
4. ANNUAL FRAME, CANOPY, AND PARTS INSPECTION
At least annually inspect frame, canopy and parts, for security of attachment. Make sure there are not any missing or
deformed members, including all hinged doors, covers and their fastening devices. DO NOT operate compressor with
defective frame, canopy and parts. Remove and replace defective parts by ordering with part numbers indicated in Parts
List.
Maintenance Performed
By
Location
Date
Maintenance Performed
By
Location
Date
5. ANNUAL ACOUSTICAL MATERIALS INSPECTION
At least annually inspect all acoustical materials, if any, for security of attachment. Make sure that there is not any material
missing or damaged (refer to Parts List). Clean or replace, if necessary. DO NOT operate compressor with defective
acoustical material. Remove and replace defective parts by ordering with part numbers indicated in the Parts List.
Maintenance Performed
By
Location
Date
Maintenance Performed
By
Location
Date
To Next Page
Loading...
