600H, 750, 750H, 750HH, 825, 900, 900H, 1050 T3 CAT User Manual 2: Description
02250197-981 R01
Subject to EAR, ECCN EAR99 and related export control restrictions. 29
2.9 Piping and instrumentation—compressor
Key Description Qty Notes
1 FILTER, AIR 1
2 GAUGE, AIR FILTER RESTRICTION 1
3INLET VALVE 1
4 COMPRESSOR 1
5 VALVE, RELIEF 2
6 SWITCH, TEMPERATURE 2
7 SENSOR, TEMPERATURE 1
8 SENSOR, PRESSURE 3
9 VALVE, DISCHARGE CHECK 1
10 RECEIVER, AIR/OIL 1
11 GLASS, SIGHT OIL LEVEL 12
12 VALVE, MINIMUM PRESSURE 1
13 VALVE, BALL 2
14 COOLER, AIR (OPTIONAL) 1
15 SEPARATOR, MOISTURE 1
16 TRAP, DRAIN 1
17 ORIFICE 8
18 VALVE, BLOWDOWN N.C. 2
19 STRAINER 2
20 SIGHTGLASS, ORIFICE BLOCK 1
21 VALVE, THERMAL BYPASS 1
22 COOLER, OIL 1
23 FILTER, OIL 1
24 VALVE, OIL STOP 1
25 VALVE, PILOT ACTUATED RECIRC SOL. 1
26 VALVE, REGULATOR BACKPRESSURE 2
27 GAUGE, PRESSURE 1
28 VALVE, PRESSURE REGULATOR 1
29 VALVE, CHECK 3
30 VALVE, SOLENOID 3-WAY RUN/START 1
31 VALVE, SOLENOID 2-WAY ELECT 3
32 SEPERATOR, ELEMENT 3
33 VALVE, SPIRAL 1
34 VENTILATOR, AIR 2
35 CYLINDER, AIR (OPTIONAL) 1
36 VALVE, PRESSURE DIFF. BYPASS 2
37 VALVE, BACK PRESSURE REGULATOR 1
38 MANIFOLD, OIL CONTROL 1
39 MANIFOLD, AIR CONTROL 1
Component Description
P1 DRY SIDE PRESSURE
P2 CONTROL PRESSURE
P3 WET SIDE PRESSURE
T1 COMPRESSOR DISCHARGE TEMPERATURE SENSOR
T3 RECEIVER TANK TEMPERATURE SWITCH (RTT)
Key Description Qty Notes
To Next Page
Loading...
