Sullair LS-200 - Section 1 Safety; 1.1 General Safety Precautions; 1.2 Personal Protective Equipment Guidelines; 1.3 Pressure Release Procedures

TABLE OF CONTENTS
PAGE
Section 1
SAFETY 1 1.1 GENERAL
1 1.2 PERSONAL PROTECTIVE EQUIPMENT
1 1.3 PRESSURE RELEASE
2 1.4 FIRE AND EXPLOSION
2 1.5 MOVING PARTS
2 1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS
2 1.7 TOXIC AND IRRITATING SUBSTANCES
3 1.8 ELECTRICAL SHOCK
3 1.9 LIFTING
4 1.10 ENTRAPMENT
Section 2
DESCRIPTION 5 2.1 INTRODUCTION
5 2.2 DESCRIPTION OF COMPONENTS
5 2.3 SULLAIR COMPRESSOR UNIT, FUNCTIONAL
DESCRIPTION
5 2.4 COMPRESSOR COOLING AND LUBRICATION SYSTEM,
FUNCTIONAL DESCRIPTION
8 2.5 COMPRESSOR DISCHARGE SYSTEM,
FUNCTIONAL DESCRIPTION
8 2.6 CONTROL SYSTEM, FUNCTIONAL DESCRIPTION-
SUPERVISOR CONTROLLER™
12 2.7 CONTROL SYSTEM, FUNCTIONAL DESCRIPTION-
ELECTRO-MECHANICAL
14 2.8 AIR INLET SYSTEM, FUNCTIONAL DESCRIPTION
15 2.9 INSTRUMENT PANEL GROUP, FUNCTIONAL
DESCRIPTION ELECTRO-MECHANICAL CONTROLLER
Section 3
SPECIFICATIONS 17 3.1 TABLE OF SPECIFICATIONS- LS20-100HP/ 75KW
18 3.2 LUBRICATION GUIDE- STANDARD COMPRESSORS
18 3.3 LUBRICATION GUIDE- 24KT COMPRESSORS
18 3.4 LUBRICATION GUIDE- OPTIONAL FLUID
19 3.5 APPLICATION GUIDE
20 Figure 3-2A Piping and Instrumentation- LS-200 and
VCC-200 Air-cooled with Electro-mechanical Controller
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL
Continued ...